You need to have an emergency plan in place for how to fix a leaking pipe in case a pipe malfunctions. The smallest crack in a pipe can result in hundreds or even thousands of dollars worth of water damage. Just like a leaking water heater, a leaking pipe can be extremely dangerous for both your family and your property.
John C. Flood has a team of experienced plumbers with over 100 years of experience in the area, providing services customers can rely on in a timely manner. However, sometimes events like leaky pipes can occur without warning and start causing damage to your property rapidly. While you wait for a plumber to come fix the problem, there are a few solutions you can look into for the interim.
There are several avenues for creating a temporary fix for a leaking pipe. Remember, a short-term fix for a leaking pipe is simply like a bandaid. If you do have a leaking pipe, it’s important to contact a plumber immediately. A burst pipe can turn a serene home into a flooded nightmare in the blink of an eye.
5 Options For How To Fix A Leaking Pipe
1. Apply pipe clamps
A pipe clamp is an industrial clamp that will contain your leaking pipe until a plumber arrives. You’ll also need a plastic or rubber patch along with some electrical tape and a pipe repair clamp. Turn off your water supply and then wrap the rubber or plastic patch around the malfunctioning pipe section. Secure the patch with electrical tape and then fasten it with the pipe clamp for maximum durability. You can purchase these multifaceted items from your local hardware store. This method of how to fix leaky pipes is one of the most comprehensive.
2. Epoxy putty
Use epoxy putty to temporarily fix a leaking pipe. This substance is a malleable, adhesive putty that can seep into small crevices (like a leaking pipe) and harden. Before starting this method of repair, shut off your water supply to ensure the substance has time to dry. Knead it in your hand to soften the compound before rubbing it into any cracks. Once the water supply is turned back on, check for any additional leaks.
3. Rubber pipe connectors
A rubber pipe connector is an option that can be quickly implemented if you need help fixing a leaking pipe during an emergency. For leaks that appear on the joint or in the middle, using rubber coupling or connectors that envelope and tighten around the leak are important.
4. Repair sleeves
Figuring out how to fix leaky pipes under sink can be more difficult than other types of leaks. A repair sleeve is a cost-effective option to temporarily repair a damaged pipe. A repair sleeve is ideal for a pinhole leak repair. This method is similar to using a pipe clamp because it can provide a sturdy temporary fix. It’s important to remember that this is only a short-term fix that can quickly unravel if left unattended for too long.
5. Duct tape
If all else fails, you can use duct tape to temporarily fix a leaky pipe. Start by wrapping the duct tape around the leaking pipe as many times as possible to create a tight seal. This method is the least likely to result in a successful repair of your pipe, so try not to turn your water back on unless it’s absolutely necessary.
Contact John C. Flood For A Water Leak Detector Inspection
It’s crucial to schedule regular plumbing maintenance to avoid a costly disaster. Although all the above solutions will work in a pinch, the truth is that a pipe that is leaking in one area is bound to start leaking in another area. You may fix the leak in one portion of the leaking pipe only to have it start to break under the pressure elsewhere.
If your water is rusty looking, that could mean your pipes are wearing down and leaks will soon appear due to other internal corrosion. Any temporary fix for a leaking pipe won't hold up forever. Call the John C. Flood plumbing experts at F:P:Sub:Phone} or schedule service online today to avoid expensive water damage.